Description
Philips Advance Catalog Number: IMH70ABLSID 1-Lamp 70W M139/143 120-277V 50/60Hz e-Vision Electronic Metal Halide Ballast
- Rated Voltage: Intellivolt 120-277Volt (50/60hz)
- Max Distance To Lamp 5ft.
- Operates (1) 70W Ceramic Metal Halide Lamp
- Ansi Code C139 Or M143
- Rated Wattage 70W
- Minimum Starting Temp. -20ºC/-4ºF
- 90°C maximum case temperature
- *BLS* Ballast with Bottom Leads with Studs
- A/B = Metal case with Dim: 5.5in (L) x 3.6in (W) x 1.5in (H)
Additional Information:
- Ballast will not operate if Insulation Detector is Absent, Shorted or Failed Open
- Maximum allowable case temperature is 90°C.
- Ignition pulse is 4 kV max
- All leads are 12 inches long
- Ballast output will shutdown after 20 minutes if lamp fails to ignite
- Power must be cycled off – then on, after replacing lamp
- Use with any Self Heating Thermal Protector (Insulation Detector)
- having equivalent resistive value 5k to 25k ohm (4 wire versions only)
- Open Circuit voltage across ID output approx 270VDC
Reviews
There are no reviews yet.