Philips Advance IMH-150-H-BLS

Description

Philips Advance E-Vision IMH150HLF Is A 150 Watt ANSI Code M102/M142/E IntelliVolt 120-277V With Minimum Starting Temp. -30°C/-20°F & Side exit leads with mounting feet 1.0 Ballast Factor Metallic enclosure Ballast Which provide Higher efficiency, Greater lumen maintenance, Longer lamp life, Enhanced color control

• Rated Wattage 150W
• Catalog No.IMH-150-H-LF
• Max Distance To Lamp 5ft.
• Ballasts are sound rated A
• Resettable thermal protection
• Minimum Starting Temp. -20ºC/-4ºF 
• 90°C maximum case temperature
• Dim: 6.3in (L) x 3.6in (W) x 1.5in (H)
• Maximum Harmonic Distortion of 15%.
• Superior heat transfer relative to plastic
• Enhancing safety and durability
• Meets universal code compliance
• Rated Voltage: Intellivolt 120V Or 277V (50/60hz)
• Reduction of lamp overpowering and/or thermal stress
• by shutting down should the lamp 
• EOL detection removes power from lamps when they 
• behave erratically Or fail to ignite 
• Feature high power factor (>0.9, a ballast factor of 1.0)
• Reach end-of-life, enhancing safety and preventing lamp cycling
• LF-Ballast with side exit leads and mounting feet, Leads exit

INSTALLATION & APPLICATION NOTES:

1. Maximum allowable case temperature is 90°C.

2. Ignition pulse is 4 kV max

3. All leads are 9 inches long

4. Ballast output will shutdown after 20 minutes if lamp fails to ignite

5. Power must be cycled off – then on, after replacing lamp

6. Connect the red lead to the center terminals of the lamp when using   screw base lamps