HONEYWELL R8182D1111/U TRIPLE AQUASTAT RELAY LESS WELL

Description

Aquastat Controller
Type Horizontal Well Immersion
Temperature Range 130 to 240 Deg F (High Limit), 110 to 220 Deg F (Low Limit)
Maximum Temperature Rating 250 Deg F (Element)
Contact Rating 4.4 Amp at 120 Volt AC Full Load/26.4 Amp at 120 Volt AC Locked Rotor (Burner), 360 Volt Amp (Ignition), 0.2 Amp (Anticipator Setting), 9 Watt (Power Consumption)
Contact Configuration SPST
Connection Type 1/2 Inch Conduit
Application Oil Fired, Hydronic Heating System
Approval UL, CSA
Overall Dimension 5-1/4 Inch Width x 3-7/16 Inch Depth x 7-1/8 Inch Height
Differential Temperature Rating 10 Deg F (Fixed), 10 to 25 Deg F (Low Limit/Circulator)
Maximum Safe Operating Pressure 200 PSI (Immersion Well), 100 PSI (Direct Immersion)
Insulation Depth 1-1/2 Inch
Humidity 0 to 95 Percent Relative, Non-Condensing
Timing 45 Second (Safety Switch)
Includes Stop Dial, Heat Conductive Compound

Use in Intermittent Ignition Applications
Capable of Zone Control with Zone Valves
Circulator Zone Control with Zc and Zr Terminals on R8182D,E,H,J 8 Flame Failure During the Running Cycle Results in a 45 Second Attempt to Restart
If Unsuccessful, Safety Shut-Off Occurs, Requiring Manual Reset before Burner Can be Restarted
R8182D,E,F Mount Directly on Burner
R8182H,J Mount on 4 X 4 in Junction Box and Include 5 Foot (1.5 Meter) Armored Capillary with Remote Sensor
C554A Cadmium Sulfide Flame Detector and a 24 Volt AC Thermostat Required

Weight	8 lbs
Dimensions	10 × 10 × 10 in

There are no reviews yet.

Be the first to review “HONEYWELL R8182D1111/U TRIPLE AQUASTAT RELAY LESS WELL”