GE 96527 CMH39PAR20/FL4K

Description

// GE Lighting 96527 Pulsearc CMH39PAR20-4200K 39W M130 PAR20 Constant Color UV-Control Metal Halide PAR20 Flood Reflector   CRI 90 Initial Lumens 1,950 E-26 Screw-In Base ANSI Code M130/O Rated Avg. Life 10,000hrs  Color Temp 4200K (942) MOL 3.6in x  DIA 2.5in Universal Burning Position UPC Code: 043168965279 Flood 25 Degrees Beam Spread Rated for Open or Enclosed Fixtures Center Beam Candlepower 6,950 (CBCP) Spec Sheet   Additional Information GE Constan tColor CMH lamps are the ultimate light source for all applications. Take advantage of the outstanding energy efficiency and energy savings – from$33.00 to $260.00* per lamp – that ConstantColor CMH lamps provide while enjoying great color quality. Color uniformity lamp-to-lamp Ceilings will look clean and bright, with minimal color variation lamp-to-lamp. ConstantColor® CMH® provides a consistent “white look”, which is critical for interior applications.  Long life 2 – 3 times longer life than Incandescent or Halogen PAR lamps. Highly efficient 4 times more lumens per watt than Incandescent or Halogen PARs. Excellent color rendering Warm white light (3000K) and exceptional color rendering (>80 CRI) make ConstantColor® CMH® an ideal source for indoor applications.   Caution • Risk of Burn – Allow lamp to cool before handling. – Do not turn on lamp until fully installed. • Lamp may shatter and cause injury if broken – Do not use excessive force when installing lamp. – Do not use lamp if outer glass is scratched or broken. Warning • Risk of Electric Shock – Do not use where directly exposed to water or outdoors without an enclosed fixture. – Turn power off before inspection, installation or removal. • Risk of Fire – Keep combustible materials away from lamp. – Use fused or thermally protected ballast – see instructions. – Use in fixture rated for this product. • Unexpected lamp rupture may cause injury, fire, or property damage – Do not exceed rated voltage. – Do not store flammable materials near/below lamp. – Do not turn on lamp until fully installed. – Do not use beyond rated life. – Do not use lamp if outer glass is scratched or broken. – Do not use where directly exposed to water or outdoors without an enclosed fixture. – Use only properly rated ballast.